Change country

en

Global web page

Product categories

CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"MA Şap" 200 self levelling mortar (up to 1-3 cm thickness)

"MA Şap" 200 self levelling mortar (up to 1-3 cm thickness)

Product consumption calculator


Preorder


Terms of use

Print


Product description

Cement-based monocomponent flooring mixture, rich in chemical mixtures, providing formation of imporous surface. It is levelled in a self-spreading manner. The product conforms to the requirements of the AZS 039-2000 (TS 11140-1993) standard.

Fields of Application

This product can be applied in the following areas:

  • Formation of flat surface before application of different materials, such as wood, laminate, parquet, carpet, PVC, ceramics;
  • Formation of strong surface resistant to erosion and dust in storages and similar facilities;

Advantages

  • Easily prepared and used;
  • Creates flat, imporous surface in a self-levelling manner.

Preparation of surface. Please pay attention to the surface to be checked and strong and removed of residues preventing adhesion. In case the surface has cracks or pores, they should be filled with Filkret repair mortar. The surface should be primed with Binmader primer to reduce the ability of water absorption of the surface and  increase its resistance.

Preparation of mixture. Gently pour out 20 kg dry mixture onto 4,0 liter water, and mix until balls and air bubbles disappear (to prepare the mixture it is recommended to use poor circulation mixer).

Application. Pour the prepared liquid mixture onto the surface. To remove air bubbles from the mixture during the application, and facilitate the levelling procedure, use prickly roller. If required, a steel trowel can be used to accelerate levelling. In case it is required to obtain 20,0 mm thickness, the MA Şap product should be applied in 2 layers. The period between the layers may be 60-90-minutes depending on the temperature. The surface applied with the product should be protected from wind and direct sun for 24-hour period.

Recommendations. In case the MA Şap product ambient temperature is within +50C and +300C, a required temperature should be provided. The product should not be used in hot (more than +300C), rainy and windy weather conditions. After use all appliances and tools should be cleaned with water.

Technical specifications

Color

Grey

Operating temperature

+50 C - +300 C

Water /dry mixture ratio

4,0 liter of water /20 kg  dry mixture

Useful life

35 minutes

Application thickness

10,0 – 30,0 mm

Hardening period:

  • initial
  • final

 

In 15-30 minutes

In 60-90 minutes

Compression strength limit:

  • in 2 days
  • in 7 days
  • in 28 days

 

3,0 MPa

20,0 MPa

30,0 MPa

Adhesion

2,0 MPa

Period of putting into operation

In 6 hours the surface can be open for movement. In 24 hours carpet, parquet, tiles, etc. can be applied onto the surface.

Packing

20 kg sacks made of 2 or 3-layer kraft paper and 1 layer of polyethilene

Consumption

The product consumption for 1 m2 surface area with 1mm thickness is 1,75 kg.

Shelf Life and storage

The product can be stored during 12 months in dry conditions, with maximum 10 sacks laid one on another.

Warnings

  • Taking into consideration that the MA Şap product is a cement-based, complex mixture, immediately rinse it with water in case of contact with skin or eyes;
  • Do not add any substances not indicated in the application procedures;
  • Specifications indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% +5% humidity. Depending on the ambient conditions these specifications may be changed.

Warranty and technical support

  • Information indicated in the technical specifications is based on scientific and practical knowledge;
  • “Matanat А" company is responsible only for the product quality;
  • Except for the works carried out under the guidance of the company specialists, “Мatanat  А" company bears no responsibility for any problems that may occur as a result of improper use of the product by other users;
  • The company reserves the right to make changes to its product that may occur due to a scientific and technnological development;
  • For technical support or more information please do not hesitate to contact “Matanat А" company!

These products are used to

"MA Şap" 100 self levelling mortar (up to 1 cm thickness)

Preorder