"PROMATEKTOR" surface protector

"PROMATEKTOR" surface protector

Product consumption calculator



Product description

It is a microlevel surface protector that does not form a crust, penetrating the surface it is used, that prevents incrustation, and that does not interfere with breathing.

Fields of Application

This product can be applied in the following areas:

  • increasing of resistance to contamination and occurence of algae on facing tiles and stone compozites made of dry mixtures due to its hydrophobicity;
  • carrying out of subsequent cleaning works and increasing of water-resistance;
  • on ceramics, granite, brick surfaces with low or medium degree water absorption;
  • on the floors subjected to high moisture; and
  • easy cleaning of dirts.


  • increases resistance to contamination and occurence of algae on stone compozites made of dry mixtures;
  • provides easy cleaning of dirts occuring on facing materials before application of mixed substances .

Preparation of surface

The surface should be cleaned with МА Sem or MA Tem products and totally dry.

Application. Apply the PROMATEKTOR product using brush or sponge in the same direction and equal amount for all sides of surface, and wait drying. Apply 2 layers onto external areas. The layers should be applied with 24-hour interval. The surfaces treated with the product can be put into operation in 24 hours. Apply the product onto vertical surfaces by means of spraying. Repeat this procedure 2-3 times depending on state of surfaces to be treated with the product (incrustation, occurence of algae, etc.).

Recommendations. If in the application of the МА Sem product the environmental temperature is less than +50C and more than +300C,  required temperature should be provided. The product should not be used in hot (more than +300C), rainy and windy weather conditions. After use all appliances and tools should be cleaned with water.


10-15 liters of the surface protector should be applied onto 100 m2 surface.

Shelf Life and storage 

The product can be stored during 12 months in unopened sacks in dry conditions.


  • taking into consideration that PROMATEKTOR is a complex mixture, immediately rinse it with water in case of contact with skin or eyes;
  • do not add any substances not indicated in the application procedures;
  • parameters indicated above were received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the ambient conditions these parameters may be changed.

Warranty and technical support

  • Information indicated in the technical specifications is based on scientific and practical knowledge;
  • “Matanat А" company is responsible only for the product quality;
  • Except for the works carried out under the guidance of the company specialists, “Мatanat  А" company bears no responsibility for any problems that may occur as a result of improper use of the product by other users;
  • The company reserves the right to make changes to its product that may occur due to a scientific and technnological development;
  • For technical support or more information please do not hesitate to contact “Matanat А" company!