CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

"MA LİME" hydrated lime alabaster

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

"FasMazaik" decorative facade coatings based mineral

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

"Staltop EX-50" solvent-free epoxide based two-component surface hardener

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

"İzoSem" waterproofing admixture

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"FugaFas 200" flex joint filler (6-20 mm)

Product consumption calculator

Preorder

Product Description

For outdoor applications cement based joint filling mixture, enriched with mixtures increasing material quality and resistance to cracks, enhancing potential of the product usage, improving the properties of waterproofing, color retention and smoothness of surfaces. The product is manufactured in colors available at the time of the order placement.

The product conforms to the requirements of AZS 321-2008 (TSEN 13888) standard.

Fields of Application

This joint filling mixture can be applied in the following areas:

Indoor and outdoor, on horizontal and vertical surfaces;
Filling of joints in required facing materials, such as granite, different size ceramics, cotto, limestone;
Filling of 6-20 mm joints in facing materials used in places with instant temperature changes, and for floorings in the areas with busy pedestrian flows and heavy vehicles traffic.

Advantages

Easy preparation and use;
Resistant to discoloration;
Does not form cracks and prevents fading of colors;
Shows high waterproof properties;
Resistant to instant temperature changes;
High quality joint filling mixture to fill joints formed by tiles of different required dimensions.
Perfectly seals stone borders.

Method of application

Preparation of the surfaces. Please be careful to the surface to be used: it should be firm, dry, clean, and should have required dimensions; the surface should be totally free of oil and paraffin residues deteriorating adhesive force.

Preparation of the mixture. Carefully pour 20kg powder mix into 5.0 –5.4 liters of water and mix till it is entirely homogeneous (to prepare the mixture it is recommended to use slow circulation mixer). Give the mixture 3-5 minutes to set, mix again before application. During mixing keep an eye on the amount of water, do not use if it is too watery. Application of product with excessive water content may cause cracks, concaves, quick erosion, dusting and color change.

Application. Fill the joints with prepared mixture using applicator gun, then strike off extra amounts of the mixture. Prepared mixture should be used within 2 hours. Do not use the mixture after this period expired.

Recommendations. If at the time of application of FugaFas 200 joint filling mixture the environmental temperature exceeds the limits of +50C- +300C range, the required temperature should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. After the useful life expiration the FugaFas 200 joint filling mixture in no case should be diluted with water or fresh powder mix. The treated area can be put into operation in 24-48 hours after accomplishment of the joint filling operations. After use all hand tools and devices should be cleaned with water. After hardening the FugaFas 200 joint filling mixture can be removed from the surface by mechanical means only.

Warnings

taking into consideration abundance of admixtures in the composition of the powder mix, immediately wash it with water in case of contact with skin or eyes;
when using pay particular attention to cleanliness of containers;
do not add to the powder mix any substances, with the exception of water.
do not add PVA;
parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

information indicated in technical specifications is based on scientific and experimental data;
Matanat А company is responsible for the product quality only;
with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
for technical support and/or more information please do not hesitate to contact the Matanat А company!