"ShpaK" white plaster white plaster based on gypsum and perlite (plaster)

"ShpaK" white plaster white plaster based on gypsum and perlite (plaster)

Product consumption calculator


Terms of use


Product description

Gypsum based, enriched with mixtures expanding opportunities of the product application, high quality, white color, final layer white plaster mixture with high adhesive ability. The product conforms to the requirements of the AZS 046 (TS 370) standard.

Fields of Application

This white plaster can be applied in the following areas:

  • can be used as the final layer of white plaster for internal ceilings and walls of buildings;
  • can be used as fine plaster applied onto suspended gypsum ceilings, gypsum panels or surfaces treated with AĞDAĞ plaster primer, made of concrete, gas concrete, bricks, briquettes (coal, peat, ore pressed in the shape of bricks), construction stone, and other construction materials.


  • The AĞDAĞ white plaster creates even, smooth, defect-free, and brilliant surfaces;
  • Is not dusting;
  • Environmentally friendly;
  • Harmless for the human health;
  • Easy preparation and use;
  • Does not require mixing with PVA adhesives and other additives;
  • Prevents losses during preparation and application;
  • Does not form cracks;
  • Strong and elastic.

Application procedures

Preparation of the surface. Please pay attention to the treated surface: it should be healthy, dry, clean, and should have required dimensions; the surface should be totally free of fat and paraffin residues deteriorating adhesive force. Before application of the white plaster the surface should be plastered with AĞDAĞ primer. Herewith the surface to be treated should first be dampened or primed with Binmader primer.

Preparation of the mixture. Pour 10 kg of AGDAG white plaster to 6.5 - 7.0 liters of water, wait 3-4 minutes, then mix using a mixer or any suitable hand tool till the mixture is entirely homogeneous. After the white plaster and water are completely mixed do not add any fresh powder or water to it.

Application. Using a trowel apply the prepared AGDAG white plaster onto the wall or ceiling surface treated with AGDAG primer. The prepared mixture should be applied within 130-150 minutes. The mixture should not be used after this period expired or crust formed.

Recommendations. At the time of the white plaster application the ambient and surface temperatures should be +50C  minimum. If at the time of application the ambient temperature exceeds the limits of +50C - +300C range, then the required temperature level should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. The can and the equipment used for preparation of the mixture should always be clean. Dirty cans and tools decrease the useful life of the mixture and reduce its quality. It is recommended to clean all hand tools and devices with water immediately after use. When using a metal trowel pay special attention to avoid traces left on the surface.


The AĞDAĞ white plaster mixture consumption at 1mm thick layer formed on the even and smooth surface is 1 kg. Hence, 1 sack of AĞDAĞ white plaster gypsum mixture is enough to evenly cover surface of 30 m2 area.

Shelf Life and Storage Method

The product can be stored during 6 months in packaged sacks in closed areas, in dry conditions, on wooden racks, maximum 10 sacks per rack placed one over another, provided that they do not contact with the floor.


  • pay special attention to the clean conditions of cans and water used for preparation;
  • do not add to the primer any substances other than water;
  • do not mix the product with PVA;
  • parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!