CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

"MA LİME" hydrated lime alabaster

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

"FasMazaik" decorative facade coatings based mineral

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

"Staltop EX-50" solvent-free epoxide based two-component surface hardener

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

"İzoSem" waterproofing admixture

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"ROKOL" masonry acrylic paint

Product consumption calculator

Preorder

Product description

Acrylic heteropolymer emulsion based high quality paint for external surfaces.

Fields of Application

This paint can be applied in the following areas:

concrete, gypsum, masonry, and other old and newly built surfaces of external elements of buildings;

Advantages

perfect adhesion to the treated surfaces;
does not form cracks and does not peel off;
resistant to rain, humidity and direct sun rays;
provides resistance to negative effects of salt water on sea-shore structures;
resistant to subsequent yellow discoloration.

Application procedure

Preparation of the surface. Prior to application of the ROKOL Acrylic paint the surface should be cleaned and totally free of fat, dust, sand and other residues deteriorating adhesive force. On the fresh plastered surfaces the paint may be applied in 21 days after plastering (at ambient temperature +20°C). The ROKOL Acrylic wall paint should be applied after the surface is primed with Binmader primer.

Application. The paint should be applied onto the surface in 2 layers: to apply the first layer, dilute the paint with water in proportion up to a half of the paint amount, and to apply the second layer – in proportion up to 1/4 of the paint amount. The layers should be applied in 1 hour interval. In the time of application the ambient temperature should be above +5⁰C, and the relative air humidity should be below 80%.

Technical specifications

Composition of the product	Acrylic heteropolymer based
Color	White
Dry residue	63%±1%
Density	1.55 g/ml
Hardening period (at ambient temperature +20⁰C) start finish	In 1-2 hours In 24 hours
Gloss (60⁰ Gardner)	7±1
Package:	2.5-; 7.5-, and 15-liter plastic cans

Consumption

1 liter of the paint may cover 11-13 m²surface.

Shelf Life and Storage Method

The product can be stored 2 year in original closed cans in the areas protected from direct sun rays and frost, at ambient temperatures between 0°C and +35°C.

Warnings

keep the product away from fire;
to prevent inhalation of paint vapors use appropriate personal protective equipment;
keep the product away from children;
prevent contact with face and skin;

Warranty and technical support

information indicated in technical specifications is based on scientific and experimental data;
Matanat А company is responsible for the product quality only;
with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
for technical support and or more information please do not hesitate to contact the Matanat А company!