CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

"MA LİME" hydrated lime alabaster

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

"FasMazaik" decorative facade coatings based mineral

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

"Staltop EX-50" solvent-free epoxide based two-component surface hardener

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

"İzoSem" waterproofing admixture

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"ROKOL" sil silicone paint

Product consumption calculator

Preorder

Product description

Acrylic heteropolymer based paint, contains silicone compounds, has high adhesive force, easily removable, creates protective and decorative deep color wall coating for indoor surfaces.

Fields of Application

This paint can be applied in the following areas:

surfaces treated with paste or primer, and other surfaces.

Advantages

the product has high adhesive force;
easily removable;
easily applicable;
has decorative appearance.

Application procedure

Preparation of the surface. The surface to be painted should be dry, dust-free, clean and smooth. Before application of ROKOL SIL one layer of the F-Pas facing paste should be applied onto the freshly painted surfaces. It is recommended to apply one layer of the BINMADER primer before application of ROKOL SIL onto the old contaminated or decoratively modified surfaces painted earlier with water based or solvent based paints.

Application. Two layers of the paint should be applied in 24 hours after application of the primer. To apply the first layer, dilute the paint with water in proportion of 35% of the paint amount, and to apply the second layer – in proportion of 15-20% of the paint amount. The layers should be applied in at least 6-hour interval. Apply the paint onto the surface using brush or roller. When applying the paint the ambient temperature should be above +5⁰C, and the relative air humidity should be below 80%.

Technical specifications

Composition of the product	Acrylic heteropolymer based
Dry residue	68%
Density	1.60 kg/liter
Full cure time	In 24 hours
Package:	3.5; 10.0, and 25.0 kg iron cans

Consumption

90-130 g of the paint may cover 1 m²surface.

Shelf Life and Storage Method

The product can be stored 2 years in closed cans at room temperature.

Warnings

to prevent inhalation of paint vapors and contact of the product with skin or eyes use personal protective equipment;
keep the product away from children;
keep the product away from fire.

Warranty and technical support

information indicated in technical specifications is based on scientific and experimental data;
Matanat А company is responsible for the product quality only;
with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
for technical support and or more information please do not hesitate to contact the Matanat А company!