CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

"MA LİME" hydrated lime alabaster

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

"FasMazaik" decorative facade coatings based mineral

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

"Staltop EX-50" solvent-free epoxide based two-component surface hardener

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

"İzoSem" waterproofing admixture

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"Shpak KARTONPİYER" (plaster)

Product consumption calculator

Preorder

Product description

High quality, environmentally friendly, white color, fine gypsum, obtained as the result of treatment of natural gypsum stones at the required temperatures. The product conforms to the requirements of the AZS 046 (TS 370) standard.

Fields of Application

This product can be applied in the following areas:

production of mouldings and covings;
production of gypsum panels and suspended gypsum ceilings

Advantages

easy application and use;
does not form cracks;
durability;
provides heat and sound insulation;
resistant to temperature, environmentally friendly;
harmless for the human health;
possess natural gypsum glitter;

Application procedures

Preparation of the surface. Prior to making mouldings (decorative gypsum products) and covings pay attention to the wall and ceiling surfaces: they should be checked for strength, and free of residues deteriorating adhesive force. Then, to obtain smooth and even surfaces the walls and ceilings should be treated with AGDAG primer and AGDAG white plaster.

Preparation of the mixture. Gradually pour 10 kg of Kartonpiyer product into 6.5 - 7.0 liters of water, then mix for 2-3 minutes using a mixer or any suitable hand tool.

Application. Use the prepared Kartonpiyer mixture for making decorative gypsum products (mouldings and covings), suspended gypsum ceilings and gypsum panels. The prepared mixture should be used within 8-12 minutes. The Kartonpiyer mixture should not be used after expiration of useful life.

Recommendations. If at the time of the product application the ambient temperature exceeds the limits of +50C - +300C range, the required temperature level should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. The can and the equipment used for preparation of the mixture should always be clean. Dirty cans and tools reduce the useful life of the mixture. After use all hand tools and devices should be immediately cleaned with water. It is recommended to use a rope or artificial fiber when making decorative elements. The risk of spalling of such products may be reduced by means of placing the rope or artificial fiber inside gypsum.

Consumption

The actual consumption varies. Due to the lack of losses during application compared to other gypsums of the same weight the AGDAG Kartonpiyer is more effective as it has lower density, and allows to produce by 5% larger amounts of mouldings and covings. It provides saving of 150 kg per 100 each of 30 kg sacks of AGDAG Kartonpiyer product.

Shelf Life and Storage Method

The product can be stored during 6 months in packaged sacks in closed areas, in dry conditions, on wooden racks, maximum 10 sacks per rack placed one over another, provided that they do not contact with the floor.

Warnings

pay special attention to clean conditions of cans and water used for preparation and application of AGDAG Kartonpiyer;
do not add to the product any substances other than water;
parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

information indicated in technical specifications is based on scientific and experimental data;
Matanat А company is responsible for the product quality only;
with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
for technical support and/or more information please do not hesitate to contact the Matanat А company!