Change country

en

Global web page

Product categories

CONSTRUCTION SYSTEMS

CERAMIC ADHESIVES

JOINT FILLING MIXTURES

REPAIR AND MOUNTING MIXTURES

WATERPROOFING MIXTURES

HEAT INSULATION MATERIALS

PRODUCTS BASED ON GYPSUM

CEMENT-BASED PLASTERS

PRODUCTS BASED ON LIME STONE

LIME PRODUCTS

PVA GLUES

PAINTING PRODUCTS

DECORATIVE FACADE COATINGS BASED MINERAL

PRIMERS

SURFACE PROTECTION AND SURFACE CLEANING

SURFACE SYSTEMS

CEMENT BASED SURFACE HARDENING MATERIALS

SOLVENT-FREE EPOXIDE BASED MATERIALS

SELF-LEVELLING FLOOR COMPOUND

ADMIXTURE SYSTEMS

CONCRETE ADMIXTURES

MIXED ADDITIVES

CONCRETING ASSISTANT MATERIALS

SUPPORTING MATERIALS FOR GRINDING

AUXILIARY PRODUCTS TO CONSTRUCTION OF UNDERGROUND

"PENOFAS" mounting system providing heat and sound insulation

"PENOFAS" mounting system providing heat and sound insulation

Product consumption calculator


Preorder


Terms of use

Print


Product description

Mounting system for heat and sound insulation formed by facing materials applied on heat insulation panels, provided for covering building facades in individual manner, decoration, and decrease of loads on building facades.

Fields of Application

This product can be applied in the following areas:

  • Mounting works on external surfaces of buildings, villas, and other facilities.
  • The product is applied as heat and sound insulation system on external walls of villas and multi-storey buildings.

Advantages

  • Penofas is a reliable heat and sound insulation system, which decreases energy consumption and complies with European standards;
  • Provides the possibility of heat and sound insulation for buildings and at the same time decorates the external walls;
  • Decreases the loads on treated buildings;
  • Provides good air permeability and water vapour transmission for buildings;
  • Provides protection of the building skeleton from corrosion caused by environmental impact.

Operation procedure for Penofas heat insulation system fabrication on building facades

  • Apply the Penoflex 5 adhesive with a plaster trowel onto the back side of the heat insulation panels: in a single line along the edges, and as a circle in the center of the panel, then adhere the heat insulation panels onto the surface to the required level in order to provide a uniform overall surface as required;
  • After hardening of the Penoflex 5 adhesive fasten the heat insulation panels mechanically to the surface using corresponding dowel nails;
  • Apply one layer of the Penoflex 8 plaster onto the surface of the heat insulation panels fixed with dowels;
  • Prior to forming crust apply mesh on the surface of the first layer;
  • Apply the second layer of the Penoflex 8 plaster onto the mesh;
  • After hardening of Penoflex 8 plaster coat the surface with Binmader primer;
  • Finally apply protective masonry paint.

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!

These products are used to

"PENOFLEX 5" adhesive for heat insulation panels

"PENOFLEX 8" plaster for heat insulation panels

Preorder