CONSTRUCTION SYSTEMS

DECORATIVE FACADE COATINGS BASED MINERAL

ADMIXTURE SYSTEMS

"Fugaton" for surface hardening of concrete joints

"Fugaton" for surface hardening of concrete joints

Product consumption calculator


Preorder


Terms of use

Print


Product Description

Gypsum based joint filling mixture, elastic, ready for application, monocomponent, resistant to negative effects of different climatic conditions, ultraviolet radiation and chemical substances available in the environment. The product conforms to the requirements of ASTM C 920 standard.

Fields of Application

This joint filling mixture can be applied in the following areas:

  • Indoor and outdoor, on horizontal surfaces;
  • Floorings;
  • Various industrial applications.
  • Hardening of surfaces;
  • Vehicle fleet, areas with heavy vehicle traffic;
  • Filling joints on concrete surfaces.

Advantages

  • Ready to use, easy to apply;
  • Resistant to discoloration;
  • Shows high waterproof properties;
  • Resistant to instant temperature changes;
  • Long effective life;

Method of application

Preparation of the surfaces. Prior to beginning the work the area of the product application should be cleaned from dust or other contaminations. Primer  is not required. To prevent spilling of the Fugaton product out of bounds of the joints during application, special ribbons should be stuck.

Application. The product is applied to fill the joints entirely (to prevent further settling of mixture) using the joint filling applicator gun. When filling the joints take care there are no air voids have been formed. After the joint filling the overlaid tape should be removed.

Recommendations. If at the time of application of Fugaton joint filling mixture the environmental temperature exceeds the limits of +50C- +300C range, the required temperature should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. After the useful life expiration the Fugaton joint filling mixture in no case should be diluted with any other substances. The treated area can be put into operation in 24-48 hours after accomplishment of the joint filling operations. After use all hand tools and devices should be cleaned with water. After hardening the Fugaton joint filling mixture can be removed from the surface by mechanical means only.

Consumption

Amount of consumed joint filling mixture varies depending on the width and depth of joints.

Shelf Life and Storage Method

The product can be stored during 12 months packed in original sacks in dry conditions.

Warnings

  • taking into consideration abundance of admixtures in the composition of the product, immediately wash it with water in case of contact with skin or eyes;
  • when using pay particular attention to cleanliness of containers;
  • parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

Warranty and technical support

  • information indicated in technical specifications is based on scientific and experimental data;
  • Matanat А company is responsible for the product quality only;
  • with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
  • the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
  • for technical support and/or more information please do not hesitate to contact the Matanat А company!